phone 1 (888) 729-7787
Request a Quote search

H90A-4

H90A-4

Horizontal Pivot Band Saws

Product Description

The H90A-4 offers up to 4 indexes 24” each and will cut up to 999 same-length parts. The H90A-4 gives fast accurate cuts on small solids and shapes. It is perfect for cutting multiple parts of the same length that are shorter or longer than 24”.

Technical Highlights

  • Main Capacity: 0-12.75" W x 0-12.75" H
  • Bar-feed: 0-24" (Stroke Air - 4 Index)
  • Blade: 12' 10" L x 1" H x .035"
  • Motor: 3 HP
  • Hydraulic Motor: N/A
  • Operation: Automatic

done Available Today

Request a Quote Shop Replacement Parts
Shop Blades Shop Fluids

Machine Information

Questions? Call Us Print Specs
  • Technical Specifications
  • Standard Features
  • Optional Features
  • Support & Documentation
  Horizontal Pivot Band Saws: H90A-4
Rectangular Capacity 0-12.75" W x 0-12.75" H
Square Capacity 0-12" (Square)
Round Capacity 0-12.75" (Diameter)
Bar-feed 0-24" (Stroke Air - 4 Index)
Motor 3 HP
Hydraulic Motor N/A
Operation Type Automatic
Power Source Air
Weight N/A
Blade Type Bandsaw
Blade Size 12' 10" L x 1" H x .035"
Cantilever
Bandsaw Blade Speed N/A
Bundle Cut? Yes
Horizontal Pivot Band Saws: H90A-4
  • Easy View Console - All Function Control
  • 24" Solid Discharge Table - Bolts to Saw
  • Vise - Adjustable Main & Feed
  • Adjustable Clamping Force
  • 2 Hold Down Fixtures
  • Guide Arm - Manual Adjustment
  • Passive "Cut Watcher®" System
  • Variable Blade Speed w/ LED Readout
  • Carbide Blade Guides
  • Manual Blade Tension
  • Adjustable Feed Rate
  • Adjustable Cutting Pressure
  • Coolant System - Flood w/ Wash-Down Hose
  • Blade Brush
  • Vertical Alignment Bar on Bar-Feed
  • Broken Blade Function
  • Out-of-Stock Function
  • Safety Guards
  • 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
  • 85 PSI, 4-6 CFM Minimum Air Requirement (Equipped w/ Air Filter/Lubricator)
Horizontal Pivot Band Saws: H90A-4
  • Vise - 3rd on Feed
  • Interlocking Vise Jaws
  • Top Clamp - Reduced Capacity Main Vise
  • Top Clamp - Reduced Capacity Feed Vise
  • Light Clamping Pressure
  • Spray Mist Lubrication
  • 5' Idle Roller Stock Table
  • 10' Idle Roller Stock Table
  • Single-Phase Voltage
  Document Name
slideshow Horizontal A-4 Part Length Calibration View
slideshow Easy View -4 Control Operation View
slideshow Horizontal Air Saw Routine Maintenance View
slideshow Carbide Blade Cleaning View
slideshow Horizontal Feed Forward Limit Switch View
description H90 Cutting Capacities View
description H90A-4 Footprint View
description Horizontal Air Saw A-4 Control Panel View
description Horizontal A-4 Air Saw Operation View
description Programming the Cub 5 Red Lion for Blade Speed View
description Horizontal Air Saw Routine Maintenance View
description Horizontal Air Saws Blade Change View
description HE&M Saw Practical Cutting Guide View
description Gear Reducers View
description Blade Guide Carbides and Installation View
description Air Bleeder Valve View
description Saw Cutting Out-of Square View
description Blade Brush Adjustment View
description Air Saw Oil Tank Reservoir Refill View
description Horizontal Retract Limit Switch Adjustment View
description Horizontal Air Saws A-4 Blade Kerf Compensation for Multiple Indexes View
description Air Saw Broken Blade Light View
description Blade Tracking and Overhang View
description Horizontal Air Saw Installation View
description Horizontal Saws Band Wheel Alignment View
description Drop In Roller View
description Air Saw Bar-feed System Overview View
description Hold-Down Fixtures View
description Horizontal Pivot Saw Feed Forward Limit Switch Diagnostic Overview View
description Horizontal Air Saw Out-of-Stock Switch View
description Horizontal Air Saw Leveling the Saw View
description Horizontal Air Saws Reduced Capacity Top Clamps View
description Horizontal Air Saws Positioning Control Console View
description Horizontal Air Saws Adjusting The Vise View
description Air Saw Bar-Feed Table Fine Adjustment Alignment View
description Horizontal Air Saw Installing The Discharge Table View
description Installing The Automatic Bar-Feed Air Saws View
description Horizontal Air Saws Removing Shipping Brackets View
description Horizontal Air Saw Safety Switches View
description Air Saw Alignments View
description Vari-Drive System Adjusting Blade Speed View
description Horizontal A-4 & A-C Air Saw Guide Arm Adjustment Manual View
description Horizontal Air Saws A-4 & A-C Finding Arm Balance Point View
description Horizontal Air Saw Adjusting Upper and Lower Arm Stops View
description Installing Feed Shuttle Safety Bumper View
description Replacing Main Program Chip View
description Horizontal Air Saws A-4 & A-C Controls Troubleshooting View
description Air Saw Lubricator Maintenance & Adjustment View

Request A Quote

Interested in pricing? Get in touch with a sales representative by submitting the Quote Request form.

Request A Quote
Search HE&MSaw.com Show Mobile Navigation